The new iCheckTPMS digital tyre inflator makes checking and adjusting your vehicle’s tyre pressures a fast and simple operation, thanks to its large easy to read digital red backlight display, large thumb operated inflator lever and easy access deflator bleed button.
Inflate, deflate & measure
600mm PVC coated braided hose
Accuracy to +/-2 psi @ 25-75psi
Easy to read red backlight display
Pressure Range 0.35 – 255 psi
2 Year Warranty
iCheckTPMS Digital Tyre Inflator
iCheckTPMS Warranty Info
All iCheckTPMS products carry a 2 year warranty from date of purchase. Please note batteries are not covered by warranty.
Should there be a manufacturing fault with any items purchased online with us, please email: ichecktpms@gmail.com within the 2 year warranty period to register your claim.
The customer is responsible for all shipping charges associated with returning the defective item/s.
iCheckTPMS reserves the right to assess all warranty claims in accordance with Australian consumer law guidelines and manufacturer conditions before a repair, replacement or refund can be approved.
Exclusions of Liability
Any disclaimers and exclusions of liability in these terms & conditions shall not apply to any damages arising from death or personal injury caused by the negligence of iCheck TPMS Bespoke 4WD Education or any of its employees or agents or fraud.
These disclaimers and exclusions shall be governed by and construed in accordance with Law.
If any provisions of these disclaimers and exclusions shall be unlawful, void or for any reason unenforceable then that provision shall be deemed severable and shall not affect the validity and enforceability of the remaining provisions.
1. How long will my order take to be delivered?
We offer same day postage for orders received before 3pm AEST and depending on your location, you will receive your order within 1-7 working days.
2. How long is the warranty on my iCheck product?
All iCheckTPMS products carry a 2 year warranty from date of sale. You can also choose a 1 year extended warranty at an additional cost.
3. Where is iCheckTPMS based?
iCheckTPMS are based in Melbourne, Victoria, Australia.
4. What if my car already has a factory tyre pressure monitoring system?
You can still use the iCheckTPMS at is will also show your tyre temperatures and your spare tyre data.
5. What is the battery life of the wheel sensors?
Depending on how often you use your vehicle, the life span for the wheel sensor batteries is between 12-18 months.
6. Are the sensors waterproof?
Yes. The wheel sensors have an IP67 waterproof rating. They can withstand a 30 minute immersion in up to one meter of water.
7. Do I need to get my wheels re balanced after installing the sensors?
No. The wheels sensors only weigh 9 grams and won’t affect the balance of your wheels.
8. Why is one side of the monitor displaying higher pressure and temperatures?
This is quite common as the heat from the sun can increase the temperature and pressure of your tyres if one side of the vehicle is in direct sunlight.
9. Do I need to use the rubber dust covers and lock nuts supplied in the kit?
No. Although advisable, the dust covers and lock nuts are there for theft prevention and sensor protection only.
10. Are the wheel sensors water and dust proof and will they handle water crossings?
Yes. Our wheel sensors have been tested in the harshest Australian conditions and are completely sealed against everything you can throw at them. If entering salt water just make sure you rinse them afterwards. Each sensor has a rubber seal that prevents water, condensation, dirt, dust and mud from entering the device.
11. What should the Low Pressure, High Pressure & High Temperature alarms be set to?
Alarm thresholds can be set for each axle meaning you can set different values for the front and rear tyres if required. The ‘on road’ low pressure setting is set at 29PSI and the high pressure setting is 44PSI For the ‘off road’ mode the settings are set at 15PSI and 25PSI. The high temperature alarm is set at 70 Deg C.
12. Can I replace a lost or damaged Sensor?
Yes. You can order and program replacement ‘learnable’ sensors for the complete range of iCheckTPMS products. Each unit has a learning mode which allows the user to program in new replacement sensors. Replacement sensors are available for each tyre location and can be purchased individually to replace the damaged or lost sensor.
13. How do I inflate or deflate the tyres once the Sensors have been fitted?
If you have fitted the sensor with the supplied lock nut simply loosen the lock nut and unscrew the sensor from the tyre valve. If you didn’t use the lock nut you can simply unscrew the wheel sensor from the tyre valve without any tools required.
14. How do I know if the batteries are going flat?
The iCheckTPMS wireless Tyre Pressure and Monitoring system monitor/receiver will show a battery icon for the specific sensor in question when it’s time to replace it. Once the icon appears, we suggest that you replace the appropriate battery within a few days. This will ensure your tyres are always protected.
15. What is the maximum transmission range for the sensors?
The transmission range is around 20 metres line of sight. However, as the sensors transmit via Radio Frequency, the vehicle shape, size of the vehicle and the metal structure can reduce this range to around 7-8 meters. Sometimes more, sometimes less. To increase the transmission range, an iCheckTPMS Signal Booster is available in the case the signal between your caravan and vehicle is not strong enough.
16. How do I install the signal booster if it is needed?
Installation is easy, just mount the signal booster somewhere between the most rear wheels and the monitor. It is fully waterproof and can be externally mounted if desired. Simply connect the red wire to a positive power source and ground the black wire. Once powered, the red light will illuminate and is now active. That’s it!
17. If I purchase the iCheckTPMS IC005 five sensor kit, can I upgrade it with more sensors if I purchase a caravan at a later date?
Yes. Simply purchase the amount of extra sensors you need and re-code them to the monitor. Please refer to the user manual for this process.
18. The iCheckTPMS IC008 eight sensor kit is designed for a 4WD and single axle caravan including the spare tyres totalling 8 sensors but can I use this on my 4WD and dual axle caravan excluding the spare tyres?
Yes. If you don’t want to monitor your spare tyres you can use the IC008 kit for a dual axle caravan although you will need to re-code two of the sensors to there new wheel locations. Please refer to the user manual for this process.
19. How long will the battery in the TPMS monitor last if there is no sun?
The monitors internal lithium battery will last between 1 to 2 months on one charge without any sun.
20. Do I have to use the lock nuts and dust covers provided in the kit?
Although advisable, you don’t need to use them as once the wheels sensor is screwed on it won’t come lose and is no different to a valve cap. This is also easier if you air up and down on a regular basis.
21. How often should I rotate my tyres on my 4WD?
It is recommended to rotate your tyres every 10,000 km to help with even tread wear and longevity of your tyres.
22. What pressures should I run in my caravan tyres?
Every caravan has different weights and tyre sizes so it’s suggested to be guided by the tyres manufacturer recommendation, as under or over inflated tyres can potentially be unsafe and reduce the life of the tyres.
